Diver USB Reading Unit
Connect the Reading Unit to a USB port on a computer to program the Diver data logger.
Connect the Reading Unit to a USB port on a computer to program the Diver data logger.
The USB Reading Unit connects to a USB port of a PC, laptop and/or tablet. Simply insert the Diver into the base of the USB Reading Unit to connect to it using the free Diver-Office software. Once connected the Diver can be programmed, settings or data read. The conductivity sensor of the CTD-Diver can be calibrated using the USB Reading Unit.
The USB Reading Unit can be used in the field or the office and supports all Divers.
Note: Diver-Office must be installed to be able to communicate with the Diver.
Height Diameter Weight Material Length USB cable | 34 mm 71 mm ~160 g Polycarbonate, ABS ~110 cm |
The USB Reading Unit driver is automatically installed when Diver-Office is installed. In case you want to re-install the drivers for the PC you can download them here.