Diver Smart Interface Cable
Connect the Divers deployed on a communication cable (DXT or DDC) to a PC, laptop and/or tablet.
Connect the Divers deployed on a communication cable (DXT or DDC) to a PC, laptop and/or tablet.
The Diver Smart Interface Cable™ is a communication device that link the Divers to a PC, laptop and/or tablet. Simply plug the Smart Interface Cable in any available USB port on the computer and connect the other end to the communication cable. The deployed Diver can now be accessed using the free Diver-Office software. Once connected, the Diver can be programmed, settings read, or data downloaded.
Note: Diver-Office 2017.2 or later must be installed to communicate to the Diver through the Diver Smart Interface Cable.
Power supply | USB |
Length USB cable | ~1.80 m |
Temperature Range | -20 to 60 °C |
Supported communication cable length (DXT or DDC) | 1 to 500 meter |
Value | Unit | |
Range | 400 to 1100 | cmH2O |
Accuracy* | ±2.0 | cmH2O |
Resolution | 0.06 | cmH2O |
* over temperature range -20 to 60 °C
Part No | Description | Remarks |
AS346 | Diver Smart Interface Cable | for AS2xxx data cables only; includes Suspension Plate |
AS351 | Diver Smart Interface Cable + DDC-DXT Adapter | for AS6xxx Diver Data Cables |
AS348 | DDC-DXT Adapter | adapter to connect the Smart Interface Cable to an AS6xxx Diver Data Cable |
The driver for the Smart Interface cable is automatically installed with Diver-Office.