Connect to Divers through Telemetry
The Diver-SDI integrates Divers with SDI-12 remote monitoring systems. A typical SDI-12 system is depicted in the figure below. On one end the Diver-SDI is connected to the SDI-12 system through the 3-wire SDI-12 bus which also include the power supply of 12 Volt. On the other end a Diver cable (AS2xxx) is attached to connect the Diver-SDI to a Diver. Diver cables up to a length of 500 meter (1,640 ft) can be used with the Diver-SDI.